1. Why does Ausgrid need to do this work?
The Dulwich Hill zone substation has been operating since 1966 and the equipment needs to be replaced so we can maintain a safe and reliable electricity supply. Additionally, due to the noise levels generated by the current transformers, Ausgrid is planning to replace the current transformers with newer, quieter transformers. The project would involve construction of a new switch room, control room, transformer driveway and three transformer bays with potential space for a fourth transformer bay if needed in the future. The existing substation needs to remain in service during the replacement.
2. Why can’t you just replace the equipment in the existing building?
The existing substation building was built in the early 60s and is reaching the end of its serviceable life. The equipment in the existing substation supplies the local area with electricity and needs to continue this function until the new substation is built. When the new substation is on line and supplying power to the community we can then switch off the old substation and decommission the building. The site for the new substation was selected because it is adjacent to the existing facility, allowing the new substation to be constructed in an area where there has traditionally been one operating. The proximity of the new substation to the existing one would make it easier to construct and would have less impact on the community overall. Ausgrid is taking the opportunity to construct a new architecturally designed building that caters for the community's future electricity needs and fits in with the character of the surrounding neighbourhood.
3. I haven’t heard any noise from the transformers, do they really need to be replaced?
The existing transformers need to be replaced to meet environmental requirements.
4. Does this proposal cater for future demand?
While this project is driven by the need to replace equipment that was installed in the 1960s, the new substation could allow for future expansion, if needed, with the provision of space for an additional spare transformer bay and associated equipment. This is being considered as part of the planning process.
5. Is recent development in the area putting pressure on the existing substation and is this why Ausgrid needs to replace the existing substation?
No, this project is driven by the need to replace equipment that was installed in the 1960’s and now needs to be retired.
6. How is Ausgrid ensuring for future capacity, considering new homes are being planning for this area?
The new substation would allow Ausgrid to continue to supply a safe and reliable electricity supply into the future. It would also allow for future expansion if needed with the provision of an additional spare transformer bay. In regards to future increase in demand, Ausgrid completes long term, about twenty years, forecasting on electricity demands, which is updated annually to incorporate new information about the area. While urban density is increasing, electricity demand is also changing due to the use of energy efficient appliances and a general trend for households to use less electricity.
Please note: further planning since this community session has seen load forecast increase, meaning there is now a need to install the transformers that can cater for higher demand now rather than later.
7. Why are you planning for twenty years when the substation could last for 50 years?
There are many factors Ausgrid has to balance when planning projects such as this. One factor is keeping costs down, so some costs where possible are deferred.
1. Is there a height difference between the design concept options?
No, all of the proposed concept designs are the same height.
2. Are the glass bricks (shown in the design concepts) windows?
No they are not windows but a visual treatment designed to break up the building’s height and bulk.
3. Would the new building be set back from the street?
Ausgrid is looking to set the building back from the street as this has been indicated as a preference by several community members. The project team is working on the extent of the setback by first determining the exact location of existing underground services, planning the location of the new underground cables and considering the location of other electrical equipment that would be required for the new substation.
4. Will the building look the same all the way around?
No, as there are requirements for the site that need to be considered such as the location of the transformers, the driveway, existing services etc. that would affect the design and location and to an extent the appearance of the building. However, Ausgrid is considering all view points and applying architectural design to each of the substation's facades.
5. Why do the concepts designs only show one view?
The concept design, showing the view from the Old Canterbury Road side, was prepared to give an indication of potential architectural styles that could be used for the substation design. The community's feedback will help determine a preferred concept that will be the basis of more detailed designs for further community input. These more detailed designs will include a range of views from around the proposed substation.
6. Can Ausgrid make the new building look like the double storey Victorian building located across the road?
Characteristics of Victorian and Federation houses in the area have been picked up as elements in the design options prepared by the architects Brewster Murray. Brewster Murray advised in answer to this question that directly copying a building’s architectural style is often not as effective as designing a building with architectural elements to fit into the surroundings as it is hard to get the proportion and other details right.
7. What does Ausgrid mean by security considerations in relation to the design options?
This relates to measures to prevent unauthorised people from entering the substation building such as fencing types and heights, wall heights and surfacing, as well as landscaping.
8. What is a CLC building and what would it look like?
Customer Load Control (CLC) is the technical name for the system that controls off peak hot water in homes and businesses. In the existing substation it is located in a small dedicated building. For the proposed new substation the project team is working on the best location for this equipment such as within the main structure or in a small separate building. Further planning has to be completed before the location can be confirmed but the location will be shown in the detailed designs developed for the community's feedback.
9. Would the new building have an architectural shell with the actual substation building inside?
No it would be the one building.
10. Is there a technical reason for the layout of the transformers?
Yes, there are technical, construction reasons and community considerations that are factored into the planning of the locations of the transformers.
11. Do you have pictures of other substations that have been built by Brewster Murray for Ausgrid?
Brewster Murray has designed substations for Ausgrid at Croydon and Top Ryde but they are much larger in scale as they are for different types of equipment. These and others examples of their work can be viewed on their web site.
12. Is the design already a done deal in a contemporary style?
No, the architect has already presented architectural styles and following feedback has prepared concept designs for further community feedback.
13. Has the structure been brought forward so as to maximise the land/lots that you can sell off?
No, the structure is still being planned but there are physical constraints to the site such as the location of water and stormwater pipes that have to be considered. This means that the substation building has to be positioned to avoid them. While Ausgrid does plan to sell off any remaining unneeded land this will not be known until the new substation has been designed, built and the old substation decommissioned.
14. How much of the structure is two levels? Can it be spread out, so that the two level part is one level and the structure therefore not be so tall?
Ausgrid has to factor in the height of the transformers but the design also considers treatments to minimise the visual impacts of the height required to enclose the transformers - this includes reducing the height of the front of the buildings, articulation of the bricks and using a variety of materials.
15. Is the building required by law to comply with the Ashfield Council LEP (2013)? Was a Development Application submitted?
No, but Council is notified and has an opportunity to provide feedback which is considered as part of the design process. Under the Environmental Planning and Assessment Act 1979, Ausgrid is the determining authority for this project. An environmental assessment (REF) will be prepared on the preferred design in accordance with Part 5 of the Environmental Planning and Assessment Act 1979 and Clause 228 of the Environmental Planning and Assessment Regulation 2000. Ausgrid has met and will continue to meet with Ashfield Council (now the Inner West Council) and seek feedback at each key stage of the project and as required. The Inner West Council also has an opportunity to submit a submission as part of the REF process.
16. Will the boundary be expanded to cover the fourth potential transformer?
The existing plan was designed with space for a fourth transformer. Further planning since this session has seen the annual load forecast record an increase, meaning there is now a need to reconfigure the transformers. The proposal is to install three larger transformers now - this means a fourth transformer won’t be required in the future.
1. Will Ausgrid need to remove the large tree located on the land proposed for the substation?
Yes, this tree will need to be removed to allow the substation to be constructed. New native landscaping is being planned as part of the substation proposal.
2. Does landscaping around a new substation have to be a certain height and a certain species?
Ausgrid generally selects lower native shrubs and other plants as landscaping around substations. This is to avoid the risk of people using larger vegetation as climb points to gain unauthorised access and to avoid large vegetation dropping into a substation and causing damage. By using local native plants, these are suited to the area and more likely to thrive. As part of the early design process, a variety of plants including shrubs and small trees have been proposed and these can be viewed online as part of the concept design package (link at right or by going to the community information and presentations section within this project page).
3. Could Ausgrid plant hedges in front of the substation that faces Old Canterbury Road?
Ausgrid will consider this as feedback for consideration as detailed designs are developed.
1. Will Ausgrid talk to other government bodies about this project?
At the first community session, residents raised concerns about existing storm water issues in the area in relation to our plans and whether we would be addressing these issues with other government bodies. Ausgrid meets regularly with other government bodies as part of our planning and any community concerns will be raised as part of this process.
2. Is there a technical reason that determines where the new transformers would be located?
Yes, there are technical reasons but also construction feasibility, community and environmental considerations that are factored into the planning of the transformer locations and the rest of the site layout. The preferred layout is the one that best meets all of these factors.
3. Since Herbert Street is significantly higher than James Street/Old Canterbury Road, the current transformers are visible from this street and the noise from the current transformers can be heard very clearly especially at night. Will the new transformers be visible from the back of the substation (which isn’t wanted)?
One of the main drivers for this project is to replace electrical equipment that is ready to be retired. This includes the existing transformers which have been identified as being noisy. Ausgrid plans to enclose the transformers for the new substation in bays to not be visible and to meet all relevant environmental criteria (including noise).
4. Will the transformers be contained to reduce the noise and will impacts to all surrounding properties be taken into account when designing/building the new substation?
The designs will consider impacts such as noise to ensure that the buildings meets all relevant design and environmental criteria.
5. Can the proposed fourth transformer as well as the control room be moved to the Old Canterbury Road side instead, closer to the residential house on the James Street - this will reduce the noise it will make to the adjoined houses?
There are site restraints which restrict the location of the new equipment and building, however please note as already mentioned, after further planning since the community session, larger transformers will be installed initially with no requirement for a fourth transformer in the future.
6. What are the plans for rest of the site?
Following the process of putting a new substation into service and decommissioning the existing facility, it is expected that Ausgrid would then consider the sale of the surplus land.
7. Would the new substation be noisy?
The new substation would cause minimal noise emissions as a result of the modern low noise equipment we propose to install in the substation. Ausgrid will complete a study on the expected noise from the operating substation to ensure that it meets all relevant guidelines and standards. This report will form part of the environmental assessment of the project.
8. When Ausgrid is working on the storm water and drains on the site, is there anything that could be done to ensure that this project will not adversely affect the local issues in regards to water supply.
Ausgrid will work with Sydney Water as part of this project, the existing site conditions will be assessed in the REF and the design of the new substation will consider these factors. For the project to be approved to proceed, the REF needs to determine that the project would not adversely affect the surrounding area.
9. Does Ausgrid know the location of the storm water drain on the existing substation site?
Ausgrid has done some initial site investigations but would need to do further work to confirm locations across all of the site.
10. Would Ausgrid allow mobile phone towers to be installed on site?
There are no plans to do this.
11. Can you remove the section in front of the existing Dulwich Hill substation as people sometimes make a mess of this area?
It is likely that the existing substation would be demolished once the new substation has been built and connected to the network.
12. Is the existing building heritage?
No, it is not a heritage building.
13. Will the existing substation wall be demolished?
It is likely that the existing substation would be demolished once the new substation has been built and connected to the network. Herbert Street considerations
14. Will Ausgrid consider the location of the traffic lights at Old Canterbury Road as it is a main thoroughfare for school kids?
Ausgrid would consider the traffic lights in our planning for the driveway for the new substation as well as in the planning for the installation of the new cables at a later date, however ultimately any decisions regarding traffic conditions are the RMS (Roads, Maritime Services)’ responsibility.
1. How much construction impact would there be from the installation of the new cables, including parking?
Ausgrid plans to connect the new substation to the existing 11,000 Volt underground cables in the area. This would involve excavation in local streets including Old Canterbury Road. This work is being assessed as part of this project and surrounding residents will be kept up to date as planning progresses. Ausgrid also plans to replace 33,000 Volt cables (which are ready to be retired) between Earlwood and the new Summer Hill substation as a related but separate project. For more information on this project, please go to www.ausgrid.com.au/summerhillcables. Like any construction work, the project would involve noise and dust, and temporary traffic and parking disruptions, which we would work to minimise as much as possible.
2. Would our area look any different after the new cables are installed?
No, once the cables have been installed underground within the road, they would not be visible and the road would be reinstated to its previous condition. There would be short term construction impacts as mentioned above.
3. Would the new cables be installed in James Street?
At this stage, Ausgrid is looking at several cable route options between Earlwood and Summer Hill for the new 33,000 Volt underground cables. One of these options includes James Street as outlined above, please visit the project web page for more information. The existing 11,000 Volt cables are in both James Street, Herbert Street and Old Canterbury Road and new cables for the new substation would be installed and connected to this existing network.
4. What impacts does the new substation have on the 11, 000 Volt cables that run toward Herbert Street? Can a new cable be used that runs under road/pathway instead of having electricity cable running through residential property?
At this stage it is our intention to maintain no easements through our existing property. High and low voltage cables running through this vicinity will be decommissioned and new cables will be installed to connect to the existing cables in Herbert Street.
5. Will any new cables go underneath footpaths?
It is likely that new 11,000 Volt cables to connect the new substation to the network would be installed under the pavement as they connect into the substation otherwise the existing 11,000 Volts cables around the substation are generally in the roadway.
6. Will the 11,000 volt cables that currently run from the Ausgrid site to Herbert Street be relocated as part of this project?
No, there are no plans for these cables to be relocated at this stage.
7. Can buildings be constructed over cables?
No, Ausgrid generally has easements over cables and under power lines to prevent buildings being constructed under or over our network. Cables and power lines need to be able to be accessed for maintenance or emergency work and to be protected from damage.
1. What will the work site look like?
A typical work site would encompass a number of vehicles including excavators, trucks to bring concrete and remove spoil and other trucks containing equipment and material. On-site personnel includes the civil contractor completing the building work for Ausgrid, specialist contractors and Ausgrid staff. Traffic control staff are also be present as required for any works such as special deliveries that may have a short term impact on traffic or parking.
2. What hours does Ausgrid work? Would there be work at night?
Ausgrid generally works the standard construction hours for these types of projects – 7am to 6pm Monday to Friday and 8am to 1pm on Saturdays. However, there may be times when we need to work out of hours, for example, to receive over size deliveries or to run tests overnight. We would advise nearby resident in advance of any out of hours work or activities that would have a greater impact than usual.
3. How long will it take to complete the work?
A civil builder would be engaged to construct the new substation buildings over approximately 12 months, with Ausgrid technicians then to complete the electrical fit out. It is anticipated that civil construction of the proposed new substation would be completed by end of 2017 and connected to the electricity network by 2018.
Construction impacts will be similar to any building construction site, with the more significant disruption occurring during the first three to six months while excavation and concreting is carried out. Once the building construction stage is finished, there will be minimal disruption while Ausgrid staff complete electrical work in the building. Once the new substation is in service, Ausgrid staff would then attend the site periodically for maintenance and the facility would not be permanently staffed.
4. Will construction workers be parking on site or on Old Canterbury Road and James Street?
Ausgrid will plan to minimise parking impacts on local residents during construction and will look at options to do this when we reach the construction planning stage.
5. Will Ausgrid provide professional cleaning services for our houses and windows periodically given the dust and debris from the construction and street works?
Ausgrid’s contractor for the civil works would be required to work under the environmental assessment (REF) conditions. The construction environmental management plan (CEMP) which sits under the REF would outline the required measures to address dust on site. In addition, during construction, the community engagement team will be on hand and available via the 24 hour community information line (or via email or site visit) to discuss any concerns about the project such as dust.
6. Could we please get a quarterly update on planned works?
Yes, Ausgrid will provide regular updates during all stages of the project.
7. Could any required signage be installed on Old Canterbury Road rather than James Street?
This will be considered, however some safety/construction signage may be required if there are access points to the substation on James Street.
1. What are the predicted EMF levels for this project?
Modelling of the magnetic fields from the proposed substation would be completed independently of Ausgrid by consultants as part of the environmental assessment of the project. Modelling reflects Ausgrid’s annual 20 year electricity network forecast and the measures to minimise magnetic fields. Modelling is conducted based on predicted forecast operation of the substation and associated cables up to 20 years in the future, which factor in load growth over this time. This means that the magnetic field levels indicated in the report will likely be higher than those actually experienced for the majority of the time. As the proposal is to replace the existing substation with a new one with no extra capacity, it is expected that magnetic fields would remain largely the same for the area. Ausgrid has taken some measurements of the existing area which can viewed in the link to the infographic at top right.
2. Will the levels of electric and magnetic fields (EMF) from the proposed cables be safe and comply with relevant Australian health guidelines?
Safety is Ausgrid’s highest priority. The proposed substation has been planned on the basis that the new substation can be operated safely in the community and this is Ausgrid’s first and most important consideration. The proposal would operate well within Australian and international health guidelines, with very little, if any change to existing magnetic fields in nearby properties.
3. What is Ausgrid’s approach to EMF?
While there remains a lack of scientific consensus about whether electric and magnetic fields (EMF) can cause any adverse health effects, Ausgrid understands that there is concern in the community about EMF. We take seriously our responsibility to help address these concerns by providing balanced and accurate information about EMF, by taking reasonable steps to limit exposure and by operating all our electrical installations prudently within Australian health guidelines. We also regularly monitor research and policy into EMF and health. As there is a lot of research and studies regarding health and EMF, Ausgrid is guided by Australian Government agency ARPANSA, which takes a whole of science approach in relation to electricity and health. This includes implementing prudent avoidance measures where practical and feasible, as we will do for this project. Ausgrid's position includes complying with all relevant national and international guidelines.