NS129

NS129: 11kV Joints and Terminations - Paper Insulated Lead Cover Cables 

This Network Standard specifies Ausgrid’s construction requirements for high voltage (11,000 volts) paper insulated lead covered (PILC) cable joints, Underground to Overhead (UGOH) connections, terminations for distribution transformers, indoor and outdoor terminations, and taped terminations in compound-filled end boxes.

Scope 

Although there are many types of high voltage (HV) PILC cable joints, terminations and UGOH connections on Ausgrid’s reticulation system, only the approved construction standards currently in use are detailed in this document. 

The requirements of this standard must always be adhered to. Any deviations from this standard must be submitted to Ausgrid for approval prior to being implemented. 

In general, Ausgrid’s current policy provides for the contestability of customer connections, recoverable works and some system augmentations. Work on Ausgrid’s supply system can only be performed by accredited and authorised persons. 

Only personnel who have been trained and assessed as being competent in the installation of PILC joints and terminations can install the joints and terminations mentioned in this Network Standard. 

This Network Standard shall be read in conjunction with NS130 and NS100. A detailed cable nomenclature is shown in NS100 External Annexure C. 

Construction details for joints, terminations, and UGOH connections which are not covered in this standard shall be sought from Ausgrid as required.