Solar charges

Solar connection applications

Ausgrid Connect -  Powering your connections

We’re working on faster, easier, and better value connections through Ausgrid Connect – our new connections portal.

On 23 November 2026 we will be launching Ausgrid Connect for Embedded Generation applications only.

  • From this date, connections applications for complying solar systems up to 30 kW will  be automatically approved.
  • For applications that require a technical assessment where additional information is required, longer approval timeframes may occur.

The remaining release of Ausgrid Connect will be completed in the new year, further details will be shared.

Find out more about Ausgrid Connect and what this means for you from 23 November.

Timeframes and fees

Single phaseTarget timeframes and typical fees (inc. GST)
Grid Connected Inverter Energy Systems up to 10kW total5 business days   |   $24.40
Grid Connected Inverter Energy Systems greater than 10kW (Up to 30kW total)10 business days    |   $138.35
Grid Connected Single Phase Inverter Energy Systems greater than 30kWNot permitted
Standby Only Generation (Rotating Machines and Inverters) upto 10kVA that utilises a 'Break Before Make' Automatic Transfer Switch or Manual Transfer Switch and is NOT connectable to the grid.Application no longer required
Rotating machines that are greater than 10kVA and/or rotating machines that may connect in parallel to the gridPlease contact Ausgrid at customernetworksolutions@ausgrid.com.au with details of your
proposal prior to submitting an online application.


 

Three phaseTarget timeframes and typical fees (inc. GST)
Standby Only Generation (Rotating Machines and Inverters) that utilises a 'Break Before Make' Automatic Transfer Switch or Manual Transfer Switch and is NOT connectable to the grid. Application no longer required
Grid Connected Inverter Energy Systems up to 10kW per phase 5 business days   |   $24.40
Grid Connected Inverter Energy Systems up to 200kVA that are export limiting generation to no more than 30kW across the site 10 business days   |   $138.35
Grid Connect Inverter Energy Systems up to 30kVA that are used in conjunction with one or more Inverter Power Sharing Devices 10 business days   |   $310.90
(Partial payment at application, remainder will be invoiced)
Grid Connected Inverter Energy Systems up to 200kVA enabled to export more than 30kW across the site that do NOT require Interface Protection 10 business days   |   $585.01
(Partial payment at application, remainder will be invoiced)
Rotating machines that may connect in parallel to the grid for no more than one second (Synchrous Close Transfer Trip)10 business days   |   $1478.32
(Partial payment at application, remainder will be invoiced)
Inverter Energy Systems over 30kW up to 200kW that DO require Interface Protection (e.g. utilising Inverter Power Sharing Devices)10 business days   |   $1169.30
(Partial payment at application, remainder will be invoiced.)
Greater than 200kW and up to 1MW Inverter Energy Systems or rotating generation greater than 30kW that may connect in parallel with the grid for one than one second24 business days    |   $5051.56
(Partial payment at application, remainder will be invoiced.)
Greater than 1MW Inverter Energy Systems or rotating generation (any size) that may connect in parallel with the grid for more than one secondVariable. Dependant on size and complexity of connecting equipment. 
Fees quoted following initial assessment of application.


Note: Where a customer is upgrading, altering, or adding to an existing Embedded Generation System, the metering/site alteration charges will apply. This fee will appear on the customers Electricity account from their nominated retailer. 

Looking for something else?

Other useful resources

Solar supportConnecting solar or small generationApply for a connection